Zed on Linux

For most people we recommend using the script on the download page to install Zed:

curl -f https://zed.dev/install.sh | sh

We also offer a preview build of Zed which receives updates about a week ahead of stable. You can install it with:

curl -f https://zed.dev/install.sh | ZED_CHANNEL=preview sh

The Zed installed by the script works best on systems that:

  • have a Vulkan compatible GPU available (for example Linux on an M-series macBook)
  • have a system-wide glibc (NixOS and Alpine do not by default)
    • x86_64 (Intel/AMD): glibc version >= 2.31 (Ubuntu 20 and newer)
    • aarch64 (ARM): glibc version >= 2.35 (Ubuntu 22 and newer)

Both Nix and Alpine have third-party Zed packages available (though they are currently a few weeks out of date). If you'd like to use our builds they do work if you install a glibc compatibility layer. On NixOS you can try nix-ld, and on Alpine gcompat.

You will need to build from source for:

  • architectures other than 64-bit Intel or 64-bit ARM (for example a 32-bit or RISC-V machine)
  • Redhat Enterprise Linux 8.x, Rocky Linux 8, AlmaLinux 8, Amazon Linux 2 on all architectures
  • Redhat Enterprise Linux 9.x, Rocky Linux 9.3, AlmaLinux 8, Amazon Linux 2023 on aarch64 (x86_x64 OK)

Other ways to install Zed on Linux

Zed is open source, and you can install from source.

Installing via a package manager

There are several third-party Zed packages for various Linux distributions and package managers, sometimes under zed-editor. You may be able to install Zed using these packages:

When installing a third-party package please be aware that it may not be completely up to date and may be slightly different from the Zed we package (a common change is to rename the binary to zedit or zeditor to avoid conflicting with other packages).

We'd love your help making Zed available for everyone. If Zed is not yet available for your package manager, and you would like to fix that, we have some notes on how to do it.

Downloading manually

If you'd prefer, you can install Zed by downloading our pre-built .tar.gz. This is the same artifact that our install script uses, but you can customize the location of your installation by modifying the instructions below:

Download the .tar.gz file:

Then ensure that the zed binary in the tarball is on your path. The easiest way is to unpack the tarball and create a symlink:

mkdir -p ~/.local
# extract zed to ~/.local/zed.app/
tar -xvf <path/to/download>.tar.gz -C ~/.local
# link the zed binary to ~/.local/bin (or another directory in your $PATH)
ln -sf ~/.local/zed.app/bin/zed ~/.local/bin/zed

If you'd like integration with an XDG-compatible desktop environment, you will also need to install the .desktop file:

cp ~/.local/zed.app/share/applications/zed.desktop ~/.local/share/applications/dev.zed.Zed.desktop
sed -i "s|Icon=zed|Icon=$HOME/.local/zed.app/share/icons/hicolor/512x512/apps/zed.png|g" ~/.local/share/applications/dev.zed.Zed.desktop
sed -i "s|Exec=zed|Exec=$HOME/.local/zed.app/libexec/zed-editor|g" ~/.local/share/applications/dev.zed.Zed.desktop

Troubleshooting

Linux works on a large variety of systems configured in many different ways. We primarily test Zed on a vanilla Ubuntu setup, as it is the most common distribution our users use, that said we do expect it to work on a wide variety of machines.

Zed fails to start

If you see an error like "/lib64/libc.so.6: version 'GLIBC_2.29' not found" it means that your distribution's version of glibc is too old. You can either upgrade your system, or install Zed from source.

Zed fails to open windows

Zed is very slow

Zed requires a GPU to run effectively. Under the hood, we use Vulkan to communicate with your GPU. If you are seeing problems with performance, or Zed fails to load, it is possible that Vulkan is the culprit.

If you're using an AMD GPU, you might get a 'Broken Pipe' error. Try using the RADV or Mesa drivers. (See the following GitHub issue for more details: #13880).

If you see a notification saying Zed failed to open a window: NoSupportedDeviceFound this means that Vulkan cannot find a compatible GPU. You can begin troubleshooting Vulkan by installing the vulkan-tools package and running:

vkcube

This should output a line describing your current graphics setup and show a rotating cube. If this does not work, you should be able to fix it by installing Vulkan compatible GPU drivers, however in some cases (for example running Linux on an Arm-based MacBook) there is no Vulkan support yet.

If you see errors like ERROR_INITIALIZATION_FAILED or GPU Crashed or ERROR_SURFACE_LOST_KHR then you may be able to work around this by installing different drivers for your GPU, or by selecting a different GPU to run on. (See the following GitHub issue for more details: #14225)

As of Zed v0.146.x we log the selected GPU driver and you should see Using GPU: ... in the Zed log (~/.local/share/zed/logs/Zed.log).

If Zed is selecting your integrated GPU instead of your discrete GPU, you can fix this by exporting the environment variable DRI_PRIME=1 before running Zed.

If you are using Mesa, and want more control over which GPU is selected you can run MESA_VK_DEVICE_SELECT=list zed --foreground to get a list of available GPUs and then export MESA_VK_DEVICE_SELECT=xxxx:yyyy to choose a specific device.

If you are using amdvlk you may find that zed only opens when run with sudo $(which zed). To fix this, remove the amdvlk and lib32-amdvlk packages and install mesa/vulkan instead. (#14141.

If you have a discrete GPU and you are using PRIME you may be able to configure Zed to work by setting /etc/prime-discrete to 'on'.

For more information, the Arch guide to Vulkan has some good steps that translate well to most distributions.

If Vulkan is configured correctly, and Zed is still slow for you, please file an issue with as much information as possible.

I can't open any files

These features are provided by XDG desktop portals, specifically:

  • org.freedesktop.portal.FileChooser
  • org.freedesktop.portal.OpenURI

Some window managers, such as Hyprland, don't provide a file picker by default. See this list as a starting point for alternatives.

Zed isn't remembering my API keys

Zed isn't remembering my login

These feature also requires XDG desktop portals, specifically:

  • org.freedesktop.portal.Secret or
  • org.freedesktop.Secrets

Zed needs a place to securely store secrets such as your Zed login cookie or your OpenAI API Keys and we use a system provided keychain to do this. Examples of packages that provide this are gnome-keyring, KWallet and keepassxc among others.

Could not start inotify

Zed relies on inotify to watch your filesystem for changes. If you cannot start inotify then Zed will not work reliably.

If you are seeing "too many open files" then first try sysctl fs.inotify.

  • You should see that max_user_instances is 128 or higher (you can change the limit with sudo sysctl fs.inotify.max_user_instances=1024). Zed needs only 1 inotify instance.
  • You should see that max_user_watches is 8000 or higher (you can change the limit with sudo sysctl fs.inotify.max_user_watches=64000). Zed needs one watch per directory in all your open projects + one per git repository + a handful more for settings, themes, keymaps, extensions.

It is also possible that you are running out of file descriptors. You can check the limits with ulimit and update them by editing /etc/security/limits.conf.

FIPS Mode OpenSSL internal error

If your machine is running in FIPS mode (cat /proc/sys/crypto/fips_enabled is set to 1) Zed may fail to start and output the following when launched with zed --foreground:

crypto/fips/fips.c:154: OpenSSL internal error: FATAL FIPS SELFTEST FAILURE

As a workaround, remove the bundled libssl and libcrypto libraries from the zed.app/lib directory:

rm ~/.local/zed.app/lib/libssl.so.1.1
rm ~/.local/zed.app/lib/libcrypto.so.1.1

This will force zed to fallback to the system libssl and libcrypto libraries.

Editing files requiring root access

When you try to edit files that require root access, Zed requires pkexec (part of polkit) to handle authentication prompts.

Polkit comes pre-installed with most desktop environments like GNOME and KDE. If you're using a minimal system and polkit is not installed, you can install it with:

  • Ubuntu/Debian: sudo apt install policykit-1
  • Fedora: sudo dnf install polkit
  • Arch Linux: sudo pacman -S polkit